Rolgrip Manual DoubleProducts > CLAMPING SYSTEMS > Rolgrip ManualRolgrip Flex

SIUSC

Rolgrip Manual

Manual clamping for upper tools by means of a comfortable ergonomic lever.
Frontal introduction and extraction of the European-type standard tool and automatic return at the stop. Ability to mount the tool inverted, from the front of the press using the manual bracket 11008 complete with screws and springs (not included in the supply) tightening with screws.

  • Description
  • Features
  • Attachments

Manual clamping for upper tools by means of a comfortable ergonomic lever.

UPPER TOOLS

Manual clamping for upper tools by means of a comfortable ergonomic lever

FRONTAL LOADING

FRONTAL introduction / extraction of the standard European type tool and automatic return at the stop.

TECNICAL FEATURES

Unit height = 100mm.
Bending axes = 7mm.
Also available H. 150 (13131-150-M) and H.120 20mm axis(13135-M).

POWER

Energy connection through patented “STAR SYSTEM”.
NO PRESENCE OF PIPES in the work area and free removal of modules immediately in any position.

DUAL ORIENTATION

Possibility of loading reversed tools using the bracket mod. 11008 (manual clampinng)

on 3mt press brake (15 modules)
OPERATION TRADITIONAL MODEL MANUAL WITH SCREWS MODEL TEDA SPEED GRIP MANUAL (13131-M)
Screw loosening 30 viti = 5″
total = 150″		 15 moduli tramite leva = 2″
total = 30″
Unloading tool Laterale = 25″
total = 100″		 Frontale = 8″
total = 32″
Tool loading Laterale = 25″
total = 100″		 Laterale = 6″
total = 24″
Pre-screwing 30 screws 4″
total = 120″		 –
Light pressing to house tools 10″
total = 10″		 –
Screwing 30 screws 3″
total = 90″		 –
Clamping 15 modules by ergonomic lever – 4″
total = 30″
TOTAL TIME 570″ = 9′,30″ 116″ = 1′,56″