FAST CLAMP3Products > CLAMPING SYSTEMS > DOUBLE FAST CLAMP3EASY CLAMP

SIUSC

DOUBLE FAST CLAMP3

Article No. With intermediate Price
DFC3
DFC3.INT100F INT100*
DFC3.INT120F INT120*
DFC3.INT100 INT100
DFC3.INT120 INT120
DFC3.INT150 INT150
DFC3.INT120-40 INT120-40
DFC3.INT150-40 INT150-40
  • Description
  • Features
  • Attachments

Manual Upper fast clamping system with front and rear clamp for R1 tools, length 150mm/5.90". Max. Load 1000 kN/m/33 US-Tons/ft

*without crowning wedge

FAST CLAMP3 is a combination of traditional clamps with screws and with a lever. Clamps are made of a more resistant material and undergo several treatments to increase their resistance and to avoid corrosion. Clamps are opened and closed by means of a lever rotating around a central pin. One of the main features of FAST CLAMP3 is the adjustability of the pin. Thanks to this feature, we can always control the clamping force of punches, even in case punch tang is worn out.
FAST CLAMP3 can be mounted on all standard intermediates and thanks to a hardened back plate, the pin doesn't damage the intermediate as it happens in traditional clamps.
A removable lever extender can be used in order to open and close clamps easier. Such lever extender can be used to open clamps with LC shorter lever mounted on the right edge of the upper beam to avoid collision during box bending.
With KDS (double clamping kit) system you can open and close front and back clamp at the same time by using the central lever.

UPPER SYSTEM

FAST CLAMP3 is compatible with all press brakes with Amada-Promecam tang. No tooling modification is required.

DOUBLE CLAMPING

FAST CLAMP3 is available with front clamp only and with double clamps (front and back) - DOUBLE FAST CLAMP3

TOOL CHANGE

Clamp is equipped with an ergonomic and adjustable lever to open and close clamp easily.
Thanks to the adjustable pin, the clamping force is always under control.

ALIGNMENT

Thanks to its curved form and its elasticity, FAST CLAMP3 guarantees punch perfect clamping and alignment, including short segments.

SAFETY

Punches are safely clamped thanks to the clamp antifall nose

SUPPLY

The system is available in manual version.
It's a complete, manual, fast and convenient clamping system.

INSTALLATION

FAST CLAMP3 is designed for a press brake with 70mm 2.76'' distance between intermediates.

ROL200 KDS MAN Extreme

Manual upper fast clamping system with double clamp (front and rear) for Type R1 tools, 150mm/5.90" length. Max. load 1000 kN/m/33 US-Tons/ft

ROL200 MAN Extreme

Manual upper fast clamping system with front clamp for Type R1 tools, 150mm/5.90" length. Max. load 1000 kN/m/33 US-Tons/ft

FAST CLAMP3

Manual Upper fast clamping system with front clamp for R1 tools, length 150mm/5.90". Max. Load 1000 kN/m/33 US-Tons/ft