Upper fast clamping system, hydraulic, in C45 hardened for R2 tools, length from 1020 to 6120 mm (40.15" to 240.94"). max load 1800 kN/m/59 US-Tons/ft…
WROL HYD EXTREME
|WROLHYD EXTREME 1020||1020 mm40.16 ''|
|WROLHYD EXTREME 1530||1530 mm60.24 ''|
|WROLHYD EXTREME 2040||2040 mm80.32 ''|
|WROLHYD EXTREME 2550||2550 mm100.39 ''|
|WROLHYD EXTREME 3060||3060 mm120.47 ''|
|WROLHYD EXTREME 3570||3570 mm140.55 ''|
|WROLHYD EXTREME 4080||4080 mm160.63 ''|
|WROLHYD EXTREME 4590||4590 mm180.71 ''|
|WROLHYD EXTREME 5100||5100 mm200.79 ''|
|WROLHYD EXTREME 5610||5610 mm220.87 ''|
|WROLHYD EXTREME 6120||6120 mm240.95 ''|
Upper fast clamping system, hydraulic, in 42CrMo4 hardened for R2 tools, length from 1020 to 6120 mm (40.15" to 240.94"). max load 1800 kN/m/59 US-Tons/ft head thrust and 2500 kN/m/82.5 US-Tons/ft. shoulder thrust
WROL clamping systems represent an evolution of R2 New Standard. They look like long beams in one solid piece with a new structural and aesthetic design. Every WROL undergoes heating treatment to give proper hardness to the contact surfaces of the system with tooling. According to the necessary capacity you can choose among Power, Supreme and Extreme line. Several lengths are available from 1020mm (3.608 ft) to 6120mm (20.131 ft) for any press brake. You can also retrofit a press brake with R1 type tang to R2 New Standard and gain some daylight thanks to the limited working height of WROL being only 80mm 3.15''. In this version you can choose between AWP version (fix) and AWPC with crowning wedges.
The appearance has been improved by reducing the overall dimensions with ergonomic advantages too and by mounting LED bars for the tool positioning or for on/off signal.
On request, the WROL system is also available with R1 upper system and R1 with crowning wedge (with extra charge).
Upper fast clamping system, hydraulic, in C45 hardened for R2 tools, length from 1550 to 4100 mm (61.02" to 161.42"). max load 1800 kN/m/59 US-Tons/ft…