MR90Products > BENDING SOLUTIONS > Special Dies > Dies with Rollers > MR130

SIUSC

MR130

Article No. Length V(mm)V('') B(mm) C(mm) Weight Price
MR130.20.78 835 mm32.87 '' 20 mm0.79 '' 45 6 22,0 kg48.5 lb
MR130.30.78 835 mm32.87 '' 24 mm0.94 '' 49 6 25,0 kg55.12 lb
MR130.30.78 835 mm32.87 '' 30 mm1.18 '' 60 8 28,0 kg61.73 lb
MR.130.40.78 835 mm32.87 '' 40 mm1.57 '' 78 8 34,0 kg74.96 lb
MR130.50.78 835 mm32.87 '' 50 mm1.97 '' 84 10 40,0 kg88.18 lb
MR130.60.78 835 mm32.87 '' 60 mm2.36 '' 94 10 45,0 kg99.21 lb
MR130.75.78 835 mm32.87 '' 75 mm2.95 '' 118 16 50,0 kg110.23 lb
MR130.80.78 835 mm32.87 '' 80 mm3.15 '' 123 16 55,0 kg121.25 lb
MR130.90.78 835 mm32.87 '' 90 mm3.54 '' 133 16 60,0 kg132.28 lb
MR130.100.78 835 mm32.87 '' 100 mm3.94 '' 143 16 65,0 kg143.3 lb
MR130.120.78 835 mm32.87 '' 120 mm4.72 '' 163 16 70,0 kg154.32 lb
Die with rollers H=130 mm. V min. available 20 mm and V max. available 120 mm.
Die with rollers H=130 mm. V min. available 20 mm and V max. available 120 mm.
  • Description
  • Features
  • Attachments

0

The dies with rollers represent an effective solution for making bends with a significant reduction of the marks on the sheet metal.
This is possible due to the presence of ground and hardened rollers that rotate accompanying the sheet metal inside the "V".
The rotation of the roller produces an attenuation of the frictions thus reducing also the necessary tonnages in the order of 10-15% less.
The seat of the "V" is also worked with measures that prevent accidental roll-out of the roll.
Each die is made of 42CrMo4 tool steel and can have different tangs for fixing on the lower bench. For a better management of the springback of the sheet metal, the "V" are at 78°.

Tangs available:

 

A10-A11-A13