ROL4 HYDProducts > CLAMPING SYSTEMS > ROL2 MANROL2 HYD

SIUSC

ROL2 MAN

Article No. Length TableTable Price
ROL2 MAN 60-C 1075 mm42.32 ''
ROL2 MAN 90-C 1075 mm42.32 ''
ROL2 CLAMP1 MAN 500 mm19.69 ''
ROL2 CLAMP1 MAN 90 500 mm19.69 ''
ROL2 CLAMP1 MAN F 500mm19.69 ''
ROL2 CLAMP1 MAN 90-F 500 mm19.69 ''
  • Description
  • Features
  • Attachments

Fast lower clamping system, manual, for R1 dies, length 150 mm/5.90"

ROL2 is the best system to clamp R1 type dies with 60mm 2.36'' and 90mm 3.54'' base.
Thanks to its construction, when the clamp is closed, clamping pressure is evenly distributed along the die and guarantees its perfect alignment. The main advantage of such system consists in die V opening being automatically centered. In addition to this, tooling clamping is faster than ever. Both in case an operator uses a pneumatic, hydraulic or manual version, he can start bending after a few seconds under the safest conditions.
ROL2 has been designed to complete clamping system range for R1 type tools.
This system can be mounted in brand new press brakes as well as in already operating press brakes. ROL2 means speed, quality and flexibility.

LOWER SYSTEM

ROL2 system is compatible with all press brakes with Amada-Promecam tang.
No tool modification is required

SPECIAL POLYURETHANE INSERT

ROL2 system contains a device which activates ROL2 CLAMP1 clamps. These clamps are integrated in the system and can clamp and release dies. A special polyurethane insert mounted in the clamps guarantees the perfect die alignment.
Clamping force is also evenly distributed along the tools.

SUPPLY

This system is available in manual, pneumatic and hydraulic versions. The manual system is composed of a special clamp called ROL2 CLAMP1, which is activated by a lever which you have to insert in the middle of the clamp.

INSTALLATION ON TABLES 60mm AND 90mm WIDE

Clamps can be installed directly to press brake table using the holes for standard clamps (hole pitch 100mm). In alternative you need to modify the hole pitch.
In order to clamp Rolleri R1 dies with 60mm 2.36'' base in tables 90mm 3.54'' wide, we supply 2 shims 15mm 0.59'' wide (with clamping pins).
The system is compatible with press brakes with automatic crowning systems.

INSTALLATION

ROL2 system is easy, innovative and, above all, flexible. To be mounted in a new press brake, it only needs a specific hole pitch and you can mount clamps directly to the table.
To be mounted in an already operating press brakes, the system is supplied with a die holder.

SAFETY

The new design enables clamping of the smallest die segments

ROL2 PN

Fast lower clamping system, pneumatic, for R1 dies, length 150 mm/5.90"

ROL2 HYD

Fast lower clamping system, Hydraulic, for R1 dies, length 150 mm/5.9"