Stripper, MT-Style, EProducts > PUNCHING AND IRONWORKER > Punching tools > Type R1: Single station > Antislug Die, EAntislug Die Nesting, E

SIUSC

Antislug Die, E

DIE CLEARANCE CALCULATOR

Article No. Shape Quality Dimensions Gioco Matrice Weight Price
1EDRRT Extreme Line mm Ø mm 3.8 kg8.38 lb
1EDRRS Supreme Line mm Ø mm 3.8 kg8.38 lb
1EDRRB Power Line mm Ø mm 3.8 kg8.38 lb
1EDSRT

Extreme Line mm mm 3.8 kg8.38 lb
1EDSRS

Supreme Line mm mm 3.8 kg8.38 lb
1EDSRB

Power Line mm mm 3.8 kg8.38 lb
  • Description
  • Features
  • Attachments

Antislug Die, E Station

EXTREME LINE

  • Hit rate application: Extreme (>380 H.P.M.)
  • Machine type: Servo Electric /High Speed Hydraulic
  • Material type - Toughness: HARD (Tensile Strength>45 kg/mm²)
  • Material Thickness: Thick (>3mm)
  • Punching operation: Nibbling
  • Amount of hits for the Job: High (>10000)

SUPREME LINE

  • Hit rate application: High (200 - 380 H.P.M.)
  • Machine type: Hydraulic
  • Material type - Toughness:  Medium (Tensile Strength 22 - 45 kg/mm²)
  • Material Thickness: Medium (1.5 - 3mm)
  • Punching operation: Partial Hit (>50% of punch surface)
  • Amount of hits for the Job: Medium (5000 - 10000

POWER LINE

  • Hit rate application: Normal (<200 H.P.M.)
  • Machine type: Mechanic
  • Material type - Toughness:  Easy (Tensile Strength <7-25 kg/mm²)
  • Material Thickness: Thin (<1.5mm)
  • Punching operation: Full Hit
  • Amount of hits for the Job: Low (<5000)

All of our high turret dies have the antislug feature as standard

Inclination at the cutting point which forces the slug downwards.

Applications: for round and shapes

STANDARD SHAPES AND KEY POSITIONING

The positioning of the key will be based on the following table, unless otherwise requested. (Drawings of tools seen from above). In case of need of keys with different positions or in case of special operations, please communicate the key positioning required.

OPTIONAL

STRAIGHT EDGE WITH STRAIGHT RELIEF

Both edge part and relief part are straight.

ALL TAPER

All tapered.

SLUG CATCHER

Constricting taper on cutting position. Best shape for slug pulling.

Applications: for blanking, heel tools, shaped dies with less than 0.1 mm of die clearance.

EXTRA CHARGE FOR DIE CLEARANCE < 0.1 mm

If the die clearance is < 0.1 mm, please consider +25% extra charge.

EXTRA CHARGE FOR DIES WITH DIMENSION < 2.0 mm

If the die has a minumum dimension < 2.0 mm, please consider +25% extra charge.