Products > BENDING SOLUTIONS > Rolla-V > RVXT-1RVXT-2

SIUSC

RVXT-1

Article No. Length Weight Model Price
RVXT-1.050 50 mm1.97 '' 0.20 kg0.44 lb
RVXT-1.440s 440 mm17.32 '' F 1.90 kg4.19 lb
RVXT-1.100 100 mm3.94 '' 0.40 kg0.88 lb
RVXT-1.200 200 mm7.87 '' 0.90 kg1.98 lb
RVXT-1.500 500 mm19.69 '' 2.10 kg4.63 lb
RVXT-1/SP Spring
RVXT-1/IN Insert
RVXT-1/DO Dowel
RVXT-1/U U Clip
Rolla-V die  XT Series in 42 Cr. max.load 500 kN/m. min. angle 60°.
Rolla-V die  XT Series in 42 Cr. max.load 500 kN/m. min. angle 60°.
  • Description
  • Features
  • Attachments

Rolla-V die XT series in 42 Cr. Max.load 50 Ton/m, 15 US-Ton/ft. Minimum angle 60°.

440mm/17.32 F

The Rolla-V XT serie dies are ideal for:

  • Making tight counter-bends thanks to the thinner stem;
  • Bending sheet metal with deformations near the bending line;
  • Bending much narrower edges than conventional dies;
  • Excellent for bending crooked cut metal sheets without deforming any edges;
  • Bending profiles with holes or button holesnear the bending line without deformation;

MIN. EDGE - Mild Steel

  mm in mm in
Punch Radius R0.5 R0.019 R1.0 R0.039
Sheet Metal thickness 0.5 mm 0.019" 2.7 0.10 2.9 0.11
Sheet Metal thickness 0.8 mm 0.031" 3.2 0.12 3.1 0.12
Sheet Metal thickness 1.0 mm 0.039" 3.5 0.14 3.6 0.14

 

NECESSARY STRENGTH - mild steel 

Punch Radius R0.2 mm R0.007 in R1.0 mm R0.039 in
Sheet Metal thickness 0.3 mm 0.01" 40 kN/m 50 kN/m
Sheet Metal thickness 0.5 mm 0.019" 50 kN/m 60 kN/m
Sheet Metal thickness 0.8 mm 0.031" 100 kN/m 130 kN/m
Sheet Metal thickness 1.0 mm 0.039" 150 kN/m 190 kN/m
Sheet Metal thickness 1.2 mm 0.04" 240 kN/m 300 kN/m
Sheet Metal thickness R0.5 mm R1.0 mm
With "V" 5.7 mm 5.7 mm
Max. Load kN/m 500 500
Min. Angle 60° 60°
Necessary Strength - Mild steel* 50 180
Necessary Strength - Stainless steel** 75  260
Min. Edge - Mild steel  2.7  4.0
Min. Edge - Stainless steel 1.7 1.3

*Necessary Strenght - Mild steel max.450 N/mm2

**Necessary Strenght - Stainless steel max.700 N/mm2

ACCESSORIES

RVX1: GREASE

RVX1 grease is a lithium lubricant with particular properties. Thanks to its additives it bears the loads of compression. It protects the parts subjected to sliding. Very suitable for preserving the seat of the inserts or rotors and avoiding abrasion. The single pack contains 500 g of grease.

Add to cart

RVX-TAPE: PROTECTION

Fix the RVX-TAPE protections on the dies for those applications where the sheet metal must not show any signs. These are adhesive strips made with composite materials able to resist compression and to maintain a particularly compressible and anti-friction contact surface with the sheet.

Add to cart

RV-TO: ASSEMBLY TOOL

This tool is created to facilitate the release of the spring from its lower pin. Thanks to its shape, the tool allows you to start the operation in absolute safety and to replace worn parts very quickly.

Add to cart

RVP65-2

Rolla-V die RVP series . Minimum angle 47°. working height=65mm/2.56", material=42Cr - Toolox44 Max. Load=150Ton/mtr - 50 US-Ton/ft

RVP100-3

Rolla-V die RVP series Minimum angle 47°. working height=100mm/3.94", material=42Cr - Toolox33 Max. Load=250Ton/mtr - 84 US-Ton/ft

RVXT-2

Rolla-V die XT Series in 42 Cr. Max.load 50 Ton/m, 15 US-Ton/ft. Minimum angle 60°.