WT Bottom Tools Compatibility
Dies Rolleri Type R2 are usually compatible with:
- press brake machines with a table groove for pins 13 x 20 mm:
- also applicable on all other press brake machines with Adapter-Systems and Adapter Rails
Going Beyond Quality
- we are REAL manufacturers and every single tool is a PRECISION TOOL
- with a unique serial number on every article, you can track every single piece of tool to the very moment of manufacturing.
- PRECISION grinding (tolerance of +/-0.01 mm / .0004”)
- guaranteed tool reproduction
- exact parallelism and alignment
- precise, consistent working height
- we can easily modify our tools to your requirements
- we have one of the largest tools inventory worldwide, ready for your needs
We use raw material only from qualified suppliers and in accordance with the HIGHEST INTERNATIONAL STANDARDS. Guaranteeing high resilience and tensile strength.
|Material Type||Mechanical resistance of the material
and the tool body
|Hardness of the material and the tool body||Hardness of the operating surfaces
after induction hardening
|42CrMo4||900-1150 N/mm2||29,1 – 36,9 HRC||54 – 60 HRC|
|C45||560-710 N/mm2||12 – 15,5 HRC||54 – 60 HRC|
- Specifications for the maximum press force kN/m are indicated as such, 1 t = 10 kN.
All Dies Rolleri Type R2:
- All dies Rolleri Type R2 are by default equipped with a 13 x 20 mm tail.