Search

Were found 140 results for "press brake"

Directly from the tool manufacturer for all types of press brakes

Type R1: Punches

Compatible with press-brakes: ACL, Accurpress, AM Machinery, Amada, Atlantic, Adira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, Haco, Hindustan, Iturrospe, Jfy, JMT, LFK, Metfab, MVD, Nargesa, Oriance, Prima Power, Promecam, Rico, Salvagnini, S…

Type R1: Dies

Compatible with press-brakes: ACL, Accurpress, AM Machinery, Amada, Atlantic, Adira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, Haco, Hindustan, Iturrospe, Jfy, JMT, LFK, Metfab, MVD, Oriance, Prima Power, Promecam, Rico, Salvagnini, Schiavi, S…

KPN

Accessory for pneumatic hemming dies

on stock

Type R2: Punches

Compatible with press-brakes: LVD,Trumpf,Darley, Safan and NSCL.

TOPW237.85.R08

Punch R2 European type TOP Series with Working height= 237mm/9,33in, , Material= 42cr, Max. load= 80 Ton/m, 24 US-Ton/ft

800 kN/m max. Horn 1 on request

TOPW237.26.R08

Punch R2 European type TOP Series with Working height= 237mm/9,33in, , Material= 42cr, Max. load= 100 Ton/m, 33 US-Ton/ft.

1000 kN/m max. Horn 1 on request

TOPW200.26.R08

Punch R2 European type TOP Series with Working height= 159.5mm/6.28in, , Material= 42cr, Max. load= 100 Ton/m, 33 US-Ton/ft.

1000 kN/m max. Horn 1 on request

TPR135.86.R1

Punch R2 type with working height=98mm/3.86", α= 86°, radius=1mm/.039", material=42Cr Max. Load=65Ton/mtr - 22 US-Ton/ft

650 kN/m max. Horn 2 on request

TPR237.80.R1

Punch R2 type with working height=200mm/7.87", α= 80°, radius=1mm/.039", material=42Cr Max. Load=80Ton/mtr - 27 US-Ton/ft

800 kN/m max. Horn 2 on request

PW200.85.R08

Punch R2 European type TOP Series with Working height= 200mm/7,87in, , Material= 42cr, Max. load= 80 Ton/m, 24 US-Ton/ft.

600 kN/m max. Horn 1 on request

Type R3: Punches

Compatible with press-brakes: Bystronic-Beyeler RFA, RF, R and S

Type R4: Punches

Compatible with LVD press brakes.

Type R4: Dies

Compatible with LVD press brakes

Type R6

Compatible with Hämmerle-Bystronic press brakes.

Type R7

Compatible with Colly press brakes

Type R8

Compatible with Colgar press brakes

Type R9

Compatible with Gasparini press brakes

Type R10

Compatible with Ajial-Axial press brakes

Heavy Duty Tools

Heavy duty tools for press brakes are designed and manufactured for bending of materials with extreme high resistance (Hardox, Weldox, etc.)

Rolla-V

Rolla-V press brake dies are the ideal solution for bending very small and mark-free edges/flanges. These dies with rollers provide a series of advantages for sheet metal bending: bending sheets with deformations close to the bending line, bending edges much narrower than conventional dies, bending slanted cut sheets without deforming any edges and…

RVM2.5_12.7

Rolla-V die with working height=100mm/3.94", material=42Cr - Toolox44 Max. Load=200Ton/mtr - 67 US-Ton/ft

2000 kN/m max. on stock

RVM2.5_13

Rolla-V die with milled groove 13 x 20 mm/0.51" x 0.78". RVM series in 42 Cr. Max.load 200Ton/m - 67 US-Tons/ft. Minimum angle 46°.

2000 kN/m max. on stock

RVM2.5

Rolla-V die with 60 mm base. RVM series in 42 Cr. Max.load 2500 kN/m. Minimum angle 46°.

2500 kN/m max. on stock

RVM3.5_12.7

Rolla-V die with milled groove 12,7 x 19 mm/0.5" x 0.75. RVM series in 42 Cr. Max.load 250Ton/m - 84 US-Tons/ft. Minimum angle 46°.

2500 kN/m max. on request

RVM3.5_13

Rolla-V die with milled groove 13 mm/0.51". RVM series in 42 Cr. Max.load 250Ton/m - 84 US-Tons/ft. Minimum angle 46°.

2500 kN/m max. on request

RVM3.5

Rolla-V die RVM series in 42 Cr. Max.load 2000 kN/m. Minimum angle 46°.

2000 kN/m max. on request

RVM90-4_13

Rolla-V die with working height=90mm/3.54", material=42Cr - Toolox33 Max. Load=300Ton/mtr - 100 US-Ton/ft

3000 kN/m max. on stock

RVM90-4_12.7

Rolla-V die with working height=90mm/3.54", material=42Cr - Toolox33 Max. Load=300Ton/mtr - 100 US-Ton/ft

3000 kN/m max. on stock

RVM90-4_60

Rolla-V die with 60/2.36" mm base. RVM series in 42 Cr. Max.load 300Ton/mtr - 100 US-Ton/ft. Minimum angle 73°.

3000 kN/m max. on stock

RVHD2

Adjustable "V" Rolla-v die in 42 Cr. Max.load 2000 kN/m. Minimum "V" 13.2 mm. Maximum "V" 28.2 mm.

2000 kN/m max. on request

RVHD2.5

Adjustable "V" Rolla-v die in 42 Cr. Max.load 2500 kN/m. Minimum "V" 28 mm. Maximum "V" 69 mm.

2500 kN/m max. on request

RVHD3

Adjustable V" Rolla-v die in 42 Cr. Max.load 3500 kN/m. Minimum "V" 39 mm. Maximum "V" 118 mm." working height=120mm/4.72", material=42Cr - Toolox33 Max. Load=350Ton/mtr - 117 US-Ton/ft

3500 kN/m max. on stock

RVHD4

Adjustable V" Rolla-v die Minimum "V" 39 mm. Maximum "V" 118 mm." working height=150mm/5.91", material=42Cr - Toolox33 Max. Load=400Ton/mtr - 117 US-Ton/ft

4000 kN/m max. on stock

Special Dies

Adjustable press brake dies with variable V opening, manual and automatic versions. Innovation and technology for any type of bending.

Rolleri Vario

Rolleri Vario is a patented adjustable die system. We can equip a press brake with a single tool and change the system "V" opening through the CNC or manually. Rolleri Vario main features are ease-of-use, maximum load up to 3000 kN/m - 99 US-Ton/ft based on the models, 60° bending angle and its modular structure. Rolleri Vario is born with 1000mm/3…

Adjustable Dies

The AD series of adjustable dies for press brake helps to comfortably bend sheet metal of various thicknesses in a single configuration. Available in different models, lengths and openings, these tools provide flexibility to your press brake.

Dies with Rollers

Die sets with rollers for press brake are an effective solution for bending with a significant reduction of marks on the sheet metal. This is possible due to the presence of ground and hardened rollers that rotate accompanying the sheet inside the "V". The rotation of the roll produces an attenuation of friction and therefore also reduces the nece…

Tool Holders

The upper intermediate, die holders and press brake adapters allow the easy use of a wide range of tools. All our tools are designed and manufactured to high quality standards to ensure maximum press brake efficiency.

Intermediates and Punch Adapters

Rolleri intermediates and adapters for punches

Bolted Adapters

For each type of press brakes

Die Adapters

Adapters to use different lower tools

Mark Free Bending

Elimination of the problem of marks on the sheet metal.

Accessories

Tooling Cabinets, Tool Trolley, Squaring and Supporting Arms

Bending box

The Rolleri bending box contains all the measuring tools necessary for those who work on the press brake

on stock

Squaring Arms

Ideal for long and short sheets. Equipped with a rotating arm for angle control

RIF - Supporting Arm

on stock

ROL200 MAN Extreme

Manual upper fast clamping system with front clamp for Type R1 tools, 150mm/5.90" length. Max. load 1000 kN/m/33 US-Tons/ft

1000 kN/m max. on stock

ROL200 KDS MAN Extreme

Manual upper fast clamping system with double clamp (front and rear) for Type R1 tools, 150mm/5.90" length. Max. load 1000 kN/m/33 US-Tons/ft

1000 kN/m max. on stock

ROL200 HYD Extreme

Hydraulic upper fast clamping system with front clamp for Type R1 tools, 150mm/5.90" length. Max. load 1000 kN/m/33 US-Tons/ft

1000 kN/m max. on stock

ROL200 KDS HYD Extreme

Hydraulic upper fast clamping system with double clamp (front and rear) for Type R1 tools, 150mm/5.90" length. Max. load 1000 kN/m/33 US-Tons/ft

1000 kN/m max. on stock

ROL200 PN Extreme

Pneumatic upper fast clamping system with front clamp for Type R1 tools, 150mm/5.90" length. Max. load 1000 kN/m/33 US-Tons/ft

1000 kN/m max. on stock

ROL200 KDS PN Extreme

Pneumatic upper fast clamping system with double clamp (front and rear) for Type R1 tools, 150mm/5.90" length. Max. load 1000 kN/m/33 US-Tons/ft

1000 kN/m max. on stock

ROL200 PN Power

Pneumatic upper fast clamping system with front clamp for Type R1 tools, 150mm/5.90" length. Max. load 1000 kN/m/33 US-Tons/ft

1000 kN/m max. on stock

ROL200 HYD Power

Hydraulic upper fast clamping system with front clamp for Type R1 tools, 150mm/5.90" length. Max. load 1000 kN/m/33 US-Tons/ft

1000 kN/m max. on stock

ROL4 MAN

Manual upper fast clamping system with front clamp for Type R1 tools, 150mm/5.90" length. Max. load 1000 kN/m/33 US-Tons/ft

1000 kN/m max. on stock

ROL4 HYD

Hydraulic upper fast clamping system with front clamp for Type R1 tools, 150mm/5.90" length. Max. load 1000 kN/m/33 US-Tons/ft

1000 kN/m max. on stock

ROL2 MAN

Fast lower clamping system, manual, for R1 dies, length 150 mm/5.90"

on request

ROL2 HYD

Fast lower clamping system, Hydraulic, for R1 dies, length 150 mm/5.9"

on request

ROL2 PN

Fast lower clamping system, pneumatic, for R1 dies, length 150 mm/5.90"

on request

WROL HYD EXTREME

Upper fast clamping system, hydraulic, in 42CrMo4 hardened for R2 tools, length from 1020 to 6120 mm (40.15" to 240.94"). max load 1800 kN/m/59 US-Tons/ft head thrust and 2500 kN/m/82.5 US-Tons/ft. shoulder thrust

1800 kN/m max. on request

WROL HYD SUPREME

Upper fast clamping system, hydraulic, in C45 hardened for R2 tools, length from 1020 to 6120 mm (40.15" to 240.94"). max load 1800 kN/m/59 US-Tons/ft head thrust and 2500 kN/m/82.5 US-Tons/ft. shoulder thrust

1800 - 250 kN/m max. on request

WROL HYD POWER

Upper fast clamping system, hydraulic, in C45 hardened for R2 tools, length from 1550 to 4100 mm (61.02" to 161.42"). max load 1800 kN/m/59 US-Tons/ft head thrust and shoulder thrust

1800 kN/m max. on request

WROL PN EXTREME

Upper fast clamping system, pneumatic, in 42CrMo4 hardened for R2 tools, length from 1020 to 6120 mm (40.15" to 240.94"). max load 1800 kN/m/59 US-Tons/ft head thrust and 2500 kN/m/82.5 US-Tons/ft. shoulder thrust.

1800 - 250 kN/m max. on request

WROL PN SUPREME

Upper fast clamping system, pneumatic, in C45 hardened for R2 tools, length from 1020 to 6120 mm (40.15" to 240.94"). max load 1800 kN/m/59 US-Tons/ft head thrust and 2500 kN/m/82.5 US-Tons/ft. shoulder thrust.

1800-2500 kN/m max. on request

WROL PN POWER

Upper fast clamping system, pneumatic, in C45 hardened for R2 tools, length from 1020 to 6120 mm (40.15" to 240.94"). max load 1800 kN/m/59 US-Tons/ft head thrust and shoulder thrust.

1800 kN/m max. on request

WROL/2 HYD

Fast lower clamping system in C45 hardened for R2 and R3 dies, length from 1020 to 6120 mm (40.15" to 240.94"). max load 2000 kN/m/66 US-Tons/ft.

2000 kN/m max. on request

WROL/2 PN

Fast lower clamping system in C45 hardened, pneumatic, for R2 and R3 dies, length from 1020 to 6120 mm (40.15" to 240.94"). max load 2000 kN/m/66 US-Tons/ft

2000 kN/m max. on request

ROL3 HYD

Hydraulic upper fast clamping system in C45 and 42CrMo4 for R3-R7-R8-R10-RX tools, length from 500 mm/19.68".

5000 kN/m max. on request

ROL3 PN

Pneumatic upper fast clamping system in C45 and 42CrMo4 for R3-R7-R8-R10-RX tools, length from 500 mm/19.68".

5000 kN/m max. on request

ROL3 MAN

Pneumatic upper fast clamping system in C45 and 42CrMo4 for R3-R7-R8-R10-RX tools, length from 500 mm/19.68".

5000 kN/m max. on request

ROL3/2 HYD

Hydraulic lower fast clamping system in C45 and 42CrMo4 for Colly, Axjal, Eht, Weinbrenner e Promecam base 60-90 mm (2.36"-3.54") dies(heavy duty). Length from 1100 to 6100 mm (43.30" to 240.16"). Max. load 300 kN/m/10 US-Tons/ft./m

on request

ROL3/2 PN

Pneumatic lower fast clamping system in C45 and 42CrMo4 for Colly, Axjal, Eht, Weinbrenner and Promecam base 60-90 mm (2.36"-3.54") mm (2.36"-3.54") dies(Heavy duty). Length from 1100 to 6100 mm (43.30" to 240.16"). Max. load 300 kN/m/10 US-Tons/ft./m.

300 kN/m max. on request

AROL HYD EXTREME

Upper fast clamping system, Hydraulic, in 42CrMo4 hardened for R5 (American) tools, length from 1219.2 to 6096 mm (48" to 240"). max load 2500 kN/m/82.5 US-Tons/ft. shoulder thrust

2500 kN/m max. on request

AROL HYD SUPREME

Upper fast clamping system, Hydraulic, in 42CrMo4 hardened for R5 (American) tools, length from 1219.2 to 6096 mm (48" to 240"). max load 2500 kN/m/82.5 US-Tons/ft. shoulder thrust

2500 kN/m max. on request

AROL HYD POWER

Upper fast clamping system, Hydraulic, in C45 hardened for R5 (American) tools, length from 1219.2 to 6096 mm (48" to 240"). max load 1500 kN/m/49 US-Tons/ft. shoulder thrust

1500 kN/m max. on request

AROL PN EXTREME

Upper fast clamping system, pneumatic, in 42CrMo4 hardened for R5 (American) tools, length from 1219.2 to 6096 mm (48" to 240"). max load 2500 kN/m/82.5 US-Tons/ft. shoulder thrust.

2500 kN/m max. on request

AROL PN SUPREME

Upper fast clamping system, pneumatic, in 42CrMo4 hardened for R5 (American) tools, length from 1219.2 to 6096 mm (48" to 240"). max load 2500 kN/m/82.5 US-Tons/ft. shoulder thrust.

2500 kN/m max. on request

AROL PN POWER

Upper fast clamping system, pneumatic, in C45 hardened for R5 (American) tools, length from 1219.2 to 6096 mm (48" to 240"). max load 1500 kN/m/49 US-Tons/ft. shoulder thrust.

1500 kN/m max. on request

FAST CLAMP1

Manual Upper fast clamping system with front clamp for R1 tools, length 150mm/5.90". Max. Load 1000 kN/m/33 US-Tons/ft.

1000 kN/m max. on stock

DOUBLE FAST CLAMP1

Manual Upper fast clamping system with front and rear clamp for R1 tools, length 150mm/5.90". Max. Load 1000 kN/m/33 US-Tons/ft.

1000 kN/m max. on stock

FAST CLAMP3

Manual Upper fast clamping system with front clamp for R1 tools, length 150mm/5.90". Max. Load 1000 kN/m/33 US-Tons/ft

1000 kN/m max. on stock

DOUBLE FAST CLAMP3

Manual Upper fast clamping system with front and rear clamp for R1 tools, length 150mm/5.90". Max. Load 1000 kN/m/33 US-Tons/ft

1000 kN/m max. on stock

EASY CLAMP

Manual Upper fast clamping system with front clamp for R1 tools, length 150mm/5.90". Max. Load 1000 kN/m/33 US-Tons/ft

1000 kN/m max. on stock

DOUBLE EASY CLAMP

Manual Upper fast clamping system with front and rear clamp for R1 tools, length 150mm/5.90". Max. Load 1000 kN/m/33 US-Tons/ft

1000 kN/m max. on stock

UNIVERSAL FAST CLAMP

Manual upper fast clamping system, front clamp with lever for R5 (American) and R1 tools, length 150mm/5.90". Max. Load 1000 kN/m/33 US-Tons/ft.

1000 kN/m max. on request

UNIVERSAL EASY CLAMP

Manual upper fast clamping system, front clamp for R5 (American) and R1 tools, length 150mm/5.90". Max. Load 1000 kN/m/33 US-Tons/ft.

1000 kN/m max. on stock

ST50-S

Retractable clamp in Fe37 for R1 dies with base 60 and 90 mm (2.36" and 3.54"), length 170 mm.

on stock

ROL TM/R1/MN

Manual crowning table in C45 hardened and ground, for R1 dies. max.Load 2000 kN/m/66 US-Tons/ft.

2000 kN/m max. on request

ROL TA/R1/MN

Motorized crowning table in C45 hardened and ground, for R1 dies. max.Load 2500 kN/m/66 US-Tons/ft.

2500 kN/m max. on request

ROL TM/R1/HYD-PN

Hydraulic/pneumatic crowning table in C45 hardened and ground. Hydraulic or pneumatic clamping for R1 dies. max.Load 2000 kN/m/66 US-Tons/ft.

2000 kN/m max. on request

ROL TA/R1/HYD-PN

Motorized crowning table in C45 hardened and ground.Hydraulic or pneumatic clamping for R1 dies. max.Load 2000 kN/m/66 US-Tons/ft.

2000 kN/m max. on request

ROL TM/R2/MN

Manual crowning table in C45 hardened and ground, for R2-R3-R4-R5 dies. max.Load 2000 kN/m/66 US-Tons/ft.

2000 kN/m max. on request

ROL TA/R2/MN

Motorized crowning table in C45 hardened and ground, for R2-R3-R4-R5 dies. max.Load 2000 kN/m/66 US-Tons/ft.

2000 kN/m max. on request

ROL TM/R2/HYD-PN

Manual crowning table in C45 hardened and ground. Hydraulic or pneumaticC for R2-R3-R4-R5 dies. max.Load 2000 kN/m/66 US-Tons/ft.

2000 kN/m max. on request

ROL TA/R2/HYD-PN

Motorized crowning table in C45 hardened and ground.Hydraulic or pneumatic clamping for R2-R3-R4-R5 dies. max.Load 2000 kN/m/66 US-Tons/ft.

on request

ROL TA/R1/HYD-PN-SPE9

Motorized hemming andcrowning table in C45 hardened and ground.Hydraulic or pneumatic clamping for R1 dies. max.Load 1000 kN/m/33 US-Tons/ft.

1000 kN/m max. on request

ROL TA/R2/HYD-PN-SPE9

Motorized hemming and crowning table in C45 hardened and ground.Hydraulic or pneumatic clamping for R2-R3-R4-R5 dies. max.Load 1000 kN/m/33 US-Tons/ft.

1000 kN/m max. on request

Space-Up

Space-Up is much more than an automatic storage system. It can provide useful information about tools by interfacing with the machines: information about tool status, position, about the operator who took them, about the value of the stock.

PROFILES

In this section there are examples of profiles designed by Rolleri to solve even the most complex geometries. Select the profile you are interested in and contact us: Rolleri offers at least 5 solutions methodologically able to bend the profile through studies and sequences of reworked folds. The profile, the number of items to be bent and the char…

How about having 7 dies in 1 tool?

Rolleri Vario can be mounted on any press brake model. It can be adapted to any machine table thanks to 1000mm - 39.37" units; these reduced lenghts enable the regulations of sector even individually. 7 dies in one single tool (50 - 75 - 100 - 125 - 150 - 175 - 200mm) (1.96"-2.95"-3.93"-4.92"-5.90"-6.88"-7.87") . Rotors system that brings a reducti…

Rolleri Tools modification

Rolleri Punches Type R1, R2, and R3 can be used on other press brake machines by modifying the tang

WEBINAR ROLLERI - BENDING

2 hours of online webinar about bending

COMPANY PRESENTATION

Established in 1987 as a family business, Rolleri Spa has become, within a few years, an important point of reference for all those involved in sheet metal deformation. The combination of passion, dynamism, experience and the search for innovative solutions have allowed the company to develop the brand internationally. Rolleri Spa produces tools, s…

ROLLERI VARIO

Rolleri Vario is a patented system of variable "V" slots. With this solution we can install a unique equipment on the press brake bench and vary the die openings through the CNC or through a manual system.

ROL200

ROL200 represents the Rolleri patented system for the safe vertical insertion and release of all tools with R1 attachment. Top quick system with front bracket for tools type R1, length 150 mm. Maximum load 1000 kN / m.

ROL2

The ROL2 represents the best performing system for the quick locking of R1 matrices with 60 mm base and 90 mm base. Thanks to the automatic clamping, the pressure exerted on the tool is well distributed with the advantage of not affecting the positioning of the tool on the lower table.

W ROL

The WROL line clamps represent an evolution of the R2 New Standard tool fixing system. Both AWP (fixed) and AWPC (with wedges) solutions are available to adjust the camber.

QUICK LOCK

The upper tools equipped with the Quick Lock system are adaptable to Trumpf, Lvd type presses or to the new press brakes with Wila New Standard clamping system. The system allows press brake operators to change various tools quickly and effectively.

ST50-S

Thanks to ST50-S, the bracket is considered to be "retractable" so when we loosen the screws, we can move the bracket and lower it, eliminating the "classic" 15 mm obstruction of standard brackets.

ROLLA-V DIES

Rolla-V press brake dies are the ideal solution for bending very small and mark-free edges. These dies with rollers provide a series of advantages for sheet metal bending: bending sheets with deformations close to the bending line, bending edges much narrower than conventional dies, bending slanted cut sheets without deforming any edges and bending…

INT100 NEWTON

Rolleri intermediate for Rolleri type R1 and Newton tools. The adapters have been created with the aim of being able to equip the press brake with a very wide range of standard tools regardless of the original attachment of the same.

INT100 A

Rolleri intermediates for Rolleri type R1 and American tools. The adapters have been created with the aim of being able to equip the press brake with a very wide range of standard tools regardless of the original attachment of the same.

BOLTED ADAPTER

The adapters have been created with the aim of being able to equip the press brake with a very wide range of standard tools regardless of the original attachment of the press brake.

MAKE THE IMPOSSIBLE POSSIBLE

Rolleri special tools. All Rolleri press brake tools are designed and manufactured in our production plants. Our highly trained technicians can assist you in designing the best tool for your needs.